Ardo melia Gebrauchsanweisung Seite 5

3. Assembly
1. Fit the lip valve (h) onto the collection cup (f) as shown. Ensure the correct orientation
of the lip valve.
2. Insert the silicone diaphragm (c) into the collection cup (f) as shown and press
down firmly.
3. Insert the breast shell (a) into the collection cup (f). The notches (marked with
arrows below) must be aligned.
Using both hands, pull the entire rim of the breast shell (a) over the edge of the
collection cup (f) and press firmly into place.
en
5