Kinderkraft KKWMOOV Bedienungsanleitung Seite 11

should be adjusted to the child's body, and should not be twisted.
● The child car seat must be replaced when it has been subject to violent stresses in an
accident.
● Do not change the child car seat in any way.
● Protect the child restraint system against direct sun light otherwise the high
temperature will hurt your child.
● Do not leave your child unattended in the seat at any time.
● Luggage or other objects liable to cause injuries in the event of a collision shall be properly
secured.
● The child car seat must not be used without the cover.
● The seat cover should not be replaced with any other than the one recommended by the
manufacturer, because the cover constitutes an integral part of the restraint
performance.
● The Instructions can be retained with the child seat for its life period.
● Not to use any load bearing contact points other than those described in the instruction
and marked on the child car seat.
● Any rigid items and plastic parts of the child car seat must be so located and installed
that they are not liable, during everyday use of the vehicle, to become trapped by
a movable seat or in a door of vehicle.
● Periodically inspect the harness, pay particular attention to attachment points, stitching
and adjusting devices.
● Do not continue to use the child car seat if parts have become damaged or have
loosened after an accident.
● In the event of an emergency it is important that the child can be released quickly. This
means that the buckle is not fully tamper proof and so your child must be taught never to
play with the buckle.
● Ensure that all parts are locked in place correctly and not penned in the adjustable
seats or doors.
● Do not use this child seat at home. It's not designed for home use and should only be
used in your car.
● Before each journey check whether the child car seat is installed firmly.
● The buckle of the safety car seat belt can't too close to the below of armrest. Please
contact the child restraint manufacturer if in doubt about this point.
● When you drive without a child in the child restraint system, always secure the system
with the adult belt.
4. Securing the baby in car seat
Open the belt buckle (press the red button).
Ensure the baby is placed correctly in the seat, its back firmly against the back of the seat.
The ergonomic shape of the shell ensures the baby doesn't slump in the seat.
The shoulder belts must fit correctly over the shoulders of the baby (D).
Slide both plastic tongue sections together (A).
EN
11