Design And Function; Complete Overview; Metal Rack - CASO DESIGN MG20CERAMIC menu Original Bedienungsanleitung

without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.
► The ventilator can continue running afterwards to cool down the device.
ATTENTION
► The CERAMIC base plate can be hot following the
cooking time. Do not touch the CERAMIC base plate!
14.1.1

Metal rack


Place the metal rack into the device with the
round spacer facing the direction of the inner rear
wall. Check that the metal rack is placed correctly.
Attention
► The rubber stoppers may not be removed from the metal rack.
► Only place the metal rack in the direction displayed in the diagram.
► Do not place the metal rack on the ceramic bottom.
Please note
14.1 Complete
overview
(1) Protective door latch
(2) Oven window
(3) CERAMIC base
plate
(4) Operating panel
(5) Oven ventilation
opening (do not
remove)
(6) Grill element
(7) Metal rack
46