Technical Data; Fault Finding And Correction - HEYLO ComPact 1500 Bedienungsanleitung

(5) Technical data

Type
Air flow rate max. (cum/h)
Compression (Pa)
Power connection (V/Hz)
Current consumption max. (A)
Power consumption max. (kW)
Protection class (motor/housing)
Height x Width x Length (mm)
Weight (kg)
Sound level dB(A)
Hose length (m)
Hose diameter (mm)
CAUTION: Within the scope of further development, technical data may be changed without prior
announcement. Some values are approximate values.

(6) Fault finding and correction

WARNING: Maintenance work shall have to be carried out with the unit switched off, i.e. with mains
plug removed.
PROBLEM
Motor is not operating
The motor is running, but
the impeller turns
irregularly or makes contact
Unit vibrates excessively
B = User | AST = Authorised service technician
ComPact 1500
230 / 50
IP 54/65
355 x 305 x 330
CAUSE
No power.
The unit has not been
switched on.
Impeller is blocked
Air inlet or outlet is blocked.
Switch has broken off.
Loose wiring.
A heavy impact has bent the
motor suspension so that the
impeller jams.
A heavy impact has caused
the motor to slip out of the
suspension so that the
impeller jams.
Collection of dirt on the
wheel.
Unbalance of the impeller.
Impeller is bent.
Motor shaft is bent.
1392
287
1.2
0.27
7.3
67
-
-
Version SOLUTION
B Connect the unit; check the fuse.
B Switch the unit on.
B Remove the reason for the blockage.
B Switch the unit off and let it cool down; then
remove blockage.
AST Order replacement switch from the dealer or
HEYLO.
AST Check wiring and tighten, if required.
AST Remove the motor from the housing, replace
or repair the bent motor suspension.
AST Remove the motor from the housing, then
place the motor in the suspension correctly.
B Clean impeller.
AST Balance or replace the impeller.
AST Replace impeller.
AST Replace motor.
11
CPC hose canister
-
-
-
-
-
-
356 x 305 x 1,050
10.7
-
7.6
200
EN