Repairs/Maintenance; Technical Data - HEYLO TD 2200 Bedienungsanleitung

Air Mover
TD 2200

7. Repairs/maintenance

Attention: Always pull out the mains plug before maintenance and repair work.
INSPECTION OF THE ELECTRICAL SYSTEM: Check the electricity cable regularly for damages.
Remove the housing regularly and check the internal wiring for blank conductors, loose fittings and
discolouration. Take out and repair damaged cables if necessary.
CLEAN AIR INLETS: Fluff and other dirt that has collected at the air inlet must be removed. Remove
fluff, lint and dust from the fan wheel, motor and side covers with a vacuum or compressed air.
CLEAN HOUSING: Clean the housing with a mild detergent and water. Restore the original shine with
vinyl cleaner and polish, e.g. used for synthetic materials for vehicles.
EXTERNAL CHECKING: Check the external parts and make sure that they have been properly
installed. Look out for unusual noises.
ENGINE AND WIRING MUST REMAIN DRY: The turbo dryer cannot be cleaned with a water hose or
pressurised washing device to prevent electrical components from getting damaged. If electrical
components still get wet, they must be dried immediately.

8. Technical Data

Air flow rate max. 1./2./3. level
Connection
Fuse
Height x Width x Depth
Weight
Engine output
Hose connection
Noise level at 3 m distance
IP-class
Attention: Technical data can be changed during the course of further development without prior
announcement. Some values are approx. – values.
TD 2200
1856 / 1996 / 2091 m³/h
230V / 50Hz
16 A
46 x 40 x 46 cm
11 kg
0.55 kW
Through adapter 3 x DN 102 mm
68 dB (A)
IP 22
14 EN