Possible Application Of The Air Mover; Operation; Maintenance / Repair - HEYLO ComPact 1500 Bedienungsanleitung

(2) Possible application of the air mover

ComPact 1500 is the ideal working instrument for modern tradesmen and service providers - for
ventilation when working in shafts, for drying of hollow spaces after water damage or for extraction
during welding work in tanks.
ComPact 1500 is set up quickly; the hose is connected to the outlet or inlet quickly; and after the work,
everything is safely packed away again. On account of the high protection class, the ComPact is
especially suitable for the rough outdoor use and on building sites.

(3) Operation

General aspects
Connect the unit to an earthed socket and set to switch to ON. Check correct operation before leaving
the unit unattended. Do not move or carry the air mover during operation. Observe the direction of air.
It is marked by an arrow on the blower.
Hose canister (optional)
In order to be able to transport air targeted, the CPC hose canister can be connected with a hose
length of 7.6 m. The CPC hose canister ensures fast fitting and removing as well as safe transport and
storage of the hose - and thus ensures high savings of working time and material.

(4) Maintenance / repair

Caution ! Remove the mains plug before maintenance and repair.
Inspection of the electric system: Check the power cord for damage in regular intervals. Remove
the housing in regular intervals and check the internal wiring for bare wires, loose fasteners and
discolouration. If and when necessary remove and repair the damaged cable.
Clean air inlet: Lint or other dirt which has collected at the air let has to be removed. Use vacuum or
pressurised air to remove lint and dust from the impeller, motor and side covers.
Clean housing: Clean the housing with a mild detergent and water. Use vinyl cleaner or polish to
restore the original glossiness.
Checking the outside: Check the external components and make sure that have been installed
correctly. Listen for unusual noises.
Motor and wiring must remain dry: In order to not damage the electric components, the turbo dryer
must not be cleaned by a water hose or pressurised water. If electrical components get wet
nonetheless, they have to be dried immediately.
ComPact 1500
with CPC hose canister
10
EN