Control Unit; Connecting Other Components - Pioneer MEP-7000 Bedienungsanleitung

CONNECTIONS
3. Connection to external monitor (pin-jack connector)
Use these connections when you wish to output the center display images to a large screen, or when using CD-G Karaoke. After
connecting this unit to the external monitor, the unit's settings must be changed (see the item "MONITOR OUT" in the topic "[1]
DISPLAY" under the section "USING THE UTILITY" on P. 60.
External monitor

4. Connecting other components

A. Connecting another mixer
Connect this unit's AUDIO OUT connectors to the mixer's LINE IN or AUX connectors. (Do not connect to PHONO connectors, since
sound will be distorted and proper playback will not be produced.)
B. Connecting a stereo amplifier (when not using DJ mixer)
Connect to CD or AUX IN connectors
(do not connect to PHONO connectors).
C. Connecting a component with digital input connectors
CD recorder, amplifier with
digital inputs, etc.
MEMO
• The digital output connectors produce only audio data without the inclusion of subcodes.
• Depending on the CD recorder or other component, certain features, including CD recording, may be restricted. For details,
consult the operating instructions for the connected component.
16
En

Control unit

Accessory audio cable
Digital
signal cable
PC
5V
MONITOR OUT
REMOTE
CONTROL
Drive unit
Drive unit