Using This Unit As A D/A Converter - Pioneer PD-50AE Bedienungsanleitung

> Before Start > Part Names

Using this unit as a D/A converter

1
2
a USB Cable
14
> Install > Playback
You can convert the digital audio of the PC to analog on this
unit, and then output it from the ANALOG OUT jacks.
Switching the source
1. Press SOURCE of this unit or the remote controller to
switch the source of the unit to "USB DAC".
Connections
2. Use an A-B type USB cable to connect a computer.
Playback
3. Start play on the player.
• The digital signals that can be input by this unit are linear
PCM signals with a sampling frequency and quantization
bit rate of 48 kHz/32 bit (operation may not be possible
with all connected devices or environments).
a
• Supported OSs of PC to be connected are Windows10
and Mac OS X.
• With OSs other than the supported ones, the sound may
be interrupted or may not come out.
• Depending on the usage environment, playback may not
be performed normally.
USB DAC
®
Advanced Setup | Others