Getting Started; Attention Before Flight; Definition Of Orientation; Receiver Features - XciteRC Hotbee 3D Bedienungsanleitung

Attention before flight

• Ensure the battery packs of both transmitter and receiver and fully charged (saturated).
• Ensure both the throttle stick and the throttle trim of your transmitter stay at the lowest positions before
EN
operation.
• Please strictly obey the order of turn on and turn off before operation. When starting your flight, please
turn on your transmitter first, and connect the power cable of your Hotbee 3D Quadrocopter last. When
finishing your flight,please disconnect the power cable of your Hotbee 3D Quadrocopter first and tum off
your transmitter last.
• An upset in the order of connection may cause your Hotbee 3D Quadrocopter to loose control. Please
cultivate a correct habit of turn on and turn off.

Definition of Orientation

We define the orientation fo Hotbee 3D Quadrocopter in order not to cause confusion in the following de-
scriptions. That is to say, the tail boom of Hotbee 3D Quadrocopter is facing the pilot (tail in),and its head
facing forward (front of pilot). The left hand of pilot Is the left side of Hotbee 3D Quadrocopter, the right hand
of pilot Is the right side of Hotbee 3D Quadrocopter. Its head is to the front and its tail boom is to the back.
The direction in which main body of Hotbee 3D Quadrocopter is facing up,and its skids are facing down.
Front

Receiver features

• lt adopts 2.4G spraad spectrum technology.
• Integrated design of 3-Axis gyro and 3- Axis accelerator
18
Up
Right
Down
5
Left
6
4 3 2
15000000 XciteRC Hotbee 3D Quadrocopter

Getting started

Back
1