Kreislaufpumpen, Wärmeträgerseite; Yonos Para Pumpenkennlinie; Liquid Temperature; Upmgeo Pumpenkennlinie - CTC EcoPart 425 Installations-, Wartungs-, Und Bedienungsanleitung

Allgemeine Informationen
3.4 Kreislaufpumpen, Wärmeträgerseite
Im Lieferumfang der Wärmepumpe sind zwei Niedrigenergiepumpen
(LEPs) enthalten. Dabei handelt es sich um ab Werk installierte
Niedrigenergieladepumpen.
Heizungs-Umwälzpumpe 8 kW
Heizungs-Umwälzpumpe 10-12 kW
Heizungs-Umwälzpumpe 14-17 KW
Hydraulic operational area

3.4.1 Yonos Para Pumpenkennlinie

4. Operating conditions

4.1 Liquid temperature

n boilers and
UPM2: +2 °C to +95 °C.
e speed,
UPM GEO and UPM2K: -10 °C to +95 °C.
To avoid condensation in the control box and stator, the liquid
temperature must always be higher than the ambient
d-water
temperature.
mal heat pumps
4.2 System pressure
with remote
Maximum 1.0 MPa (10 bar).
PWM signal
4.3 Inlet pressure
The following minimum pressure must be available at the pump
d-water
inlet during operation:
than for the
Liquid temperature
mal heat pumps
Inlet pressure
with remote
PWM signal
5. Performance curves

3.4.2 UPMGEO Pumpenkennlinie

considerably.
H H
e performance [ft] [m]
30
28
26
24
liquids, not 22
20
18
Tolerances of each curve according to EN 1151-1:2006
equirements of
16
systems, for
14
12
Datasheet Yonos PARA RS ../7.0 PWM1
10
d be used only
8
approx. 14 °dH.
6
4
antifreeze
2
C.
0
liquids, such
Fig. 2
H H
[ft] [m]
uits filled with
26
pending on the
24
viscosity will
22
osity increase
20
as the
18
CTC EcoPart i425-i435 Pro 18
s may result in
16
ntrolled by a
14
rload.
12
10
9
UPM Geo 25-85
8
XX-75
XX-70
7
XX-60
6
XX-50
5
XX-40
4
3
2
1
0
0.0 0.4 0.8 1.2 1.6 2.0 2.4
0 2 4 6 8 10
UPM2 and UPM GEO performance range
8
25-70 180
7
25-60 180
6
25-50 180
5
25-40 180
4
3
Yonos Para PWM 7.0 Art.-Nr.: 586396 303
Yonos Para PWM 7.5 Art.-Nr.: 586396 302
UPMGEO 25-85 130 Art.-Nr.: 586396 301
95 °C
0.05 MPa (0.5 bar)
UPM2 / UPM Geo
2.8 3.2 3.6 4.0 4.4 Q [m³/h]
Q [US GPM]
12 14 16 18
UPM2K
WILO Intec 08.2012