Description Of The Device; Features; Installation; Installing/Replacing The Lamp - EuroLite SKY Beam Bedienungsanleutung

The maximum ambient temperature t
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Compact outdoor effect
• Attract attention with the Sky Beam
• Visible from up to 3-4 km (depending on the weather)
• Suitable for external use, IP 33
• Powerful and concentrated beam moves in a circular motion
• The rotation speed can be adjusted by means of a rotary regulator
• Ready for connection with power plug
• For ground installation
• For HMI 1200 W discharge lamp

INSTALLATION

Installing/Replacing the lamp

For the installation, you need one HMI 1200 100V/1200W lamp.
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp and replace the lamp in time.
Keep exchanged lamp in a protective container and remove accordingly.
During the operation, the lamp reaches temperatures of up to 725° C.
= 45° C must never be exceeded.
a

DANGER TO LIFE!

Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
15/33 51812670_V_1_1.DOC