Parkside PADS 5 A1 Montage-, Bedienungs- Und Sicherheitshinweise

DIAMOND TILE DRILL & BLADE SET PADS 5 A1
DIAMOND TILE DRILL & BLADE SET
Assembly, operation and safety notes
GEREEDSCHAPSKOFFER VOOR TEGELBEWERKING
Montage-, gebruiks- en veiligheidsinstructies
FLIESEN-WERKZEUGKOFFER
Montage-, Bedienungs- und Sicherheitshinweise
IAN 488319_2501
D1
D2
F
E
G
A
C
DIAMOND TILE DRILL & BLADE SET
˜ Introduction
We congratulate you on the purchase of your new product. You have chosen
a high quality product. Familiarise yourself with the product before using it for
the first time. In addition, please carefully refer to the operating instructions
and the safety advice below. Only use the product as instructed and only for
the indicated field of application. Keep these instructions in a safe place. If
you pass the product on to anyone else, please ensure that you also pass on
all the documentation with it.
˜ Intended use (disc)
(Diamond drill bits)
This product is designed for dry drilling using standard angle grinders with an
M14 mount (dry drilling of porcelain stoneware, granite, marble, and similar
materials). This product is intended for use in private households only and is
not designed for commercial use.
˜ Scope of delivery
5 x Diamond drill bits (6 mm/8 mm/20 mm/35 mm/68 mm)
1 x Turbo diamond cup wheel, 125 x 22.2 mm
1 x „Segments" diamond cutting disc, 125 x 1.2 x 22.2 mm
1 x „Cross-cut segments" diamond cutting disc, 125 x 1.2 x 22.2 mm
1 x Grinding finger, 10 mm
˜ Technical data
Diameter:
Max. Rated speed:
Working depth:
Diameter
6 mm
8 mm
20 mm
35 mm
68 mm
B
D
6 mm/8 mm/20 mm/35 mm/68 mm
13,300 rpm
approx. 35 mm
Cutting speed
4.1 m/s
5.5 m/s
13.9 m/s
24.4 m/s
47.3 m/s
GB/IE/NI