Overvoltage - NARDA NRA-3000 RX Bedienungsanleitung

Narda
Electric shock from liquid entering the device
If liquid gets inside the device casing, there is a danger of potentially fatal electric
shock and the device may be damaged or destroyed.
► Make sure that no liquid can get into the device.

Overvoltage

Incorrect connectors and excessive voltages adversely affect the safety of the
device and can endanger the user.
► This device is intended for use with the fixed electrical installation within a building
complying with IEC 61010-1 overvoltage category II. Only use the device under the
conditions specified in this standard.
► The inputs are not rated for connection to mains or overvoltage category II, III or IV
circuits.
Safety and malfunction
Improper use, damage, and unauthorized repairs can affect the safety and function
of the device.
► Only use the device under the conditions and for the purpose for which it was
designed.
► Check the device for damage regularly.
► Make sure that any repairs are made only by qualified persons.
Hot connector sockets
The connecting sockets (RF IN) on the back panel can get very warm if the device is
used for long periods. This is normal.
► Please be careful when touching the connectors after using the device for a long period
of time.
Overheating in rack
Fitting the device in an unventilated rack may result in malfunctioning and damage.
► Make sure that the device is operated within the ambient temperature range stated in
the specifications.
► Make sure that there is adequate space around the device and that there is sufficient
ventilation.
NRA Series
2 Important safety instructions
WARNING
WARNING
WARNING
CAUTION
NOTICE
9