Cleaning The Lifting Device - Probst M-Jet-250 Betriebsanleitung

8. Turn the filter screen to the right until it is fixed in
place again by the pressure pieces.

9.6 Cleaning the lifting device

Clean the lifting device exclusively with an active surfactant-based cleaner (pH neutral).
NOTE
Aggressive cleaning agents
Damage to the suction plates and vacuum hoses!
4Clean suction plates only with an active surfactant-based cleaner.
4Clean mechanically at the same time (soft brush).
4Do not use aggressive cleaning agents such as cold cleaners , carbon tetrachloride, hydrocarbons or
vinegar-based cleaners for cleaning.
4Do not use sharp-edged objects (wire brushes, sandpaper, etc.).
• Remove any adhering objects and dirt such as adhesive, glue, chips and dust from the
suction plates.
• Clean mechanically at the same time (soft brush).
• Allow to dry at room temperature.
9 Maintenance
47