Autool AS509 Bedienungsanleitung Seite 7

PRECAUTIONS
Warnings
Relevant
document
notes
Before using the product, please pay attention to the following
operations:
Wear safety goggles during operation and avoid coolant
splashing into your eyes.
Do not test if there is insufficient coolant in the beaker (dry
burning of the test rod can cause damage).
After testing, both the test rod and coolant will be at high
temperatures. Do not touch to avoid burns.
Do not pour the tested coolant back into the coolant reservoir
for reuse, as it may affect driving safety.
After testing, pour the coolant from the beaker into the waste
fluid container. Then, add 50ml of clean water to test the boiling
point in order to clean the remaining coolant on the test rod.
If consecutive tests on the same coolant sample yield different
results, this is normal.
This device is specialized for coolant testing. Any damage to
the product or property caused by use for other purposes is not
the responsibility of the manufacturer.
This device requires a professional technician or trained repair
personnel for use. Do not allow non-automotive repair person-
nel or children to touch or use it.
When performing consecutive tests, wait until the probe
temperature drops below 50°C before continuing to ensure
measurement accuracy.
This user manual provides instructions on the use of the coolant
boiling point tester, along with the basic professional knowledge
required, including safety guidelines for operating the device and
effective testing instructions, to ensure that technicians can use
the device correctly for coolant testing. Before using this product
for the first time, please read this manual carefully and also refer
to the following documents to assist with your assessment:
6