DeFelsko PosiTector Dew Point Meter Logger Plus Bedienungsanleitung Seite 9

Logged batches can also be viewed on PosiSoft.net or PosiSoft
Desktop (pg. 9-10).
NOTE:
Additional datasets cannot be stored into a previously
logged batch.
Alarms
Enabling Alarm Mode on the PosiTector DPM L+ automatically
alerts the user by email when current climatic conditions exceed
pre-set values. Alarm Mode can be used in conjunction with
Logging Mode.
To enable Alarm Mode, select Alarms from the Setup menu in the
PosiTector App.
For each parameter, select between OFF, ≥ (greater than or equal
to), and ≤ (less than or equal to) using the drop down menu. Select
the box next to each parameter and set the value. In Alarm Mode,
if an alarm condition is met the relevant parameter is displayed in
red, and the alarm icon is displayed beside it.
To be alerted when WiFi signal strength is low, toggle Signal
Strength ON. To be alerted when the PosiTector DPM L+ battery
level is low, toggle Battery Level ON.
To receive email alerts when Alarm conditions are met, enter an
email address in the box at the top of the Alarms screen. When
connected to WiFi, the PosiTector DPM L+ probe will automatically
send an email. Select Test Email to have a test email sent to the
entered email address.
Select OK to accept changes and exit the Alarm Mode setup
screen.
Reporting Stored Measurement Data
View, share and print professional PDF reports using the
PosiTector App, PosiSoft Desktop software and cloud-based
PosiSoft.net.
Data is downloaded from the PosiTector DPM L+ probe wirelessly
via WiFi and Bluetooth. The USB port on the probe is used to pro-
vide continuous power, and cannot be used to download readings
from memory.
Alarm Mode
8