DeFelsko PosiTector Dew Point Meter Logger Plus Bedienungsanleitung Seite 6

WiFi Check
When selected, the PosiTector DPM L+ will perform a Network
Connection Test. During the test, the PosiTector DPM L+ will
disconnect from the PosiTector App. Within 30 seconds, the
probe will reappear on the list of available probes. Select the
probe from the list and ensure the Last Sync Successful icon
is displayed.
NOTE:
To ensure logged readings can be viewed remotely, it is
recommended to Check WiFi from the location where the
PosiTector DPM L+ is logging.
WiFi Streaming URL
The PosiTector DPM L+ can be configured to send GET requests
to a specified URL. This solution turns the probe into an Internet
of Things device and is ideal for users who want to stream live
readings to a central application or database.
More detailed instructions and further examples of configuring
WiFi Streaming can be found at www.defelsko.com/developer-
resources#wifi-streaming
Reset WiFi
Clears all saved WiFi settings from the PosiTector DPM L+,
including Network SSID, and passcode.
Change Units
By default, PosiTector DPM L+ probes display and record
temperature in Celsius (°C). To convert the displayed temperature
to Fahrenheit, select Units from the PosiTector App Setup menu.
Temperature units cannot be changed when Logging Mode is
enabled, and the option will not be available in the menu. To
change units, first select Stop Logging from the PosiTector App
Setup menu.
the probe's memory.
Changing units will delete all existing readings from
5