DeFelsko PosiTector Dew Point Meter Logger Plus Bedienungsanleitung Seite 8

subsequent datasets at the user-specified measurement Interval.
The PosiTector DPM L+ does not need to remain connected to
the PosiTector App to continue logging datasets. A maximum of
10,000 datasets (Ta, Ts, Td, Ts-Td, RH, Tw) can be stored in
PosiTector DPM L+ memory. All datasets are date and time
stamped.
Logged datasets download automatically from the probe when
connected to the PosiTector App. Datasets are stored into a
Batch (group). Each time a new Log is started, all datasets are
saved into a new batch.
To quit logging, select Stop Logging from the menu. Datasets in
the probe are not erased until a new Log is started or units are
changed. All stored datasets will remain in the PosiTector App.
NOTE:
If the PosiTector DPM L+ is switched off or if battery
power is lost, Logging Mode will turn off. Logged measurements
will remain in PosiTector DPM L+ memory.
The currently active logging
batch and
downloaded logged batches
can be viewed
PosiTector App.
To view the currently active
logging batch, simply connect
to the PosiTector DPM L+
probe (pg. 3). The batch will
automatically download and
display. The
datasets will update at each
logging interval
connected via the App.
Previously logged batches can
be viewed by selecting Open
within the Memory menu.
View Logged Datasets
previously
in the
displayed
while
7
Batch
Dataset
Reading
number
PosiTector App