Renkforce RF-TURBD-010 Bedienungsanleitung Seite 42

9.7 Attach the dust cover
9.8 Set the (LINE / PHONO) switch
Important:
Risk of damage to audio equipment and/or hearing loss! Never connect the
LINE output cable to a PHONO input if the preamp is switched ON (LINE).
LINE PHONO
L LINE OUT R
Connection
type
LINE OUT
LINE OUT
USB TO PC
42
■
Fully insert both hinges into the slots on the base
and cover as shown.
■
Close the dust cover when the product is not in use.
USB TO PC
Cable Switch
position
RCA
RCA
USB
The LINE/PHONO switch switches the preamp
ON/OFF. Refer to the following connection table
before connecting the RCA or USB outputs to a
device.
Preamp
PHONO OFF
LINE ON
LINE ON
Device
input
Phono input
AUX or line in-
put
USB input