Renkforce RF-TURBD-010 Bedienungsanleitung Seite 38

7.4 Additional information
Part Description
8 RCA cable connection to amplifier PHONO or LINE input.
Red: right channel / White: left channel.
9 Switches internal RIAA pre-amp ON (LINE) / OFF (PHONO).
Set the switch as follows:
- PHONO: if connecting to amplifier PHONO input
- LINE: if connecting to amplifier AUX input
10 Transfer audio from the record player to your computer via the in-
cluded USB cable.
12 Main power switch.
17 Adjust the feet so the product sits level.
A Use the clamp to secure the tone arm when it is not being used.
B The lever moves the tone arm vertically to or from the record.
C Numbers on the dial indicate the tracking force.
D Balances the tone arm and can be adjusted to apply the correct
tracking force.
H Secures the head shell to the tone arm. Do not over tighten.
I Use this to control the tone arm lift.
J While playing a record, the stylus tip experiences an inward force
that can be countered by adjusting the anti-skate to match the track-
ing force.
8 Choosing a location
■
Place the product on a flat, level, and stable surface.
■
Keep the product away from areas that may be affected by movement and vi-
brations.
■
The location should meet the operating conditions stated in the section:
nical data [} 52].
38
Tech-