Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Procedure:
Step 1: Unscrew the fuseholder on the underside of the device with a fitting screwdriver from the housing
(anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
Should you have further questions, please contact your dealer.
Attention
! Always disconnect the Coin Counter/Sorter CS100 from the mains before retrieving other coins
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Fuse:
Hopper capacity:
Counting speed:
Counting display:
Maximum ambient temperature T
Max. relative humidity:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 17.12.2008 ©
from the flap on the rear of the device.!
230 V AC, 50 Hz ~
45 W
T 3.15 A, 250 V
ca. 500 coins
215 pieces/minute
4 digital LEDs
:
45°C
a
50%
355 x 330 x 265 mm
4.5 kg
15/15
00029135.DOC, Version 1.2
Werbung
Inhaltsverzeichnis
