Batch-Function
Empty the coins to be counted into the Hopper. Press the SET Key to choose the respective coin which will
then be counted in specific amounts (i.e. for coin rolls).
Press the BAT Key. By using the „ + „ and „ - „Keys, you can supply the desired coin amount.
Repeat this procedure (SET- Key, BAT- Key, „ + „ and „ - „Keys). You must press the SET- Key for every
desired denominational value.
Press the START & STOP Key. The machine sorts the coins and deposits them into the appropriate coin
trays. As soon as the preset amount is reached, the machine stops in order to allow the removal of the
respective coins. To continue, press the START & STOP Key again. Repeat until all coins have been
sorted/counted. The total amount can be seen on the keyboard display.
Additionally, if you would like to know how many coins were counted from each denominational value, then
press the REPORT-Key.
Press the C-Key to display the total amount again.
Note: Due to the Memory Function, the Coin Counter/Sorter CS100 is capable of remembering the defined
settings, even after switching the device off and on again. In order to cancel the defined settings, press the
SET- Key then the BAT- Key and with the „ - „Key adjust the value to 0, or change the setting as you like.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Attention
! On occasion, the coins in the coin channel may become jammed
before they fall into the coin tray. In such a case, please disconnect the device from
the mains and with the help of a pen or small stick, loosen the coins from the bottom.
Afterwards, use the device as described above.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
14/15
00029135.DOC, Version 1.2