Meec tools R6218CP Originalanweisungen Seite 21

controlled with the power switch are dangerous and
must be repaired.
● Pull out the plug and/or remove the battery before
making any adjustments, changing accessories or
putting the power tool away. These safety precautions
reduce the risk of accidentally starting the power tool.
● Store power tools out of the reach of children when not in
use. Never allow children, or anyone who is unfamiliar
with the power tool and these instructions,
to use the tool. Power tools are dangerous if used by
inexperienced persons.
● Maintain power tools and accessories. Check that moving
parts are properly adjusted and do not jam, and that no
parts are incorrectly fitted or damaged. Check for other
factors that could affect functionality. If a power tool is
damaged it must be repaired before it is used again.
Many accidents are caused by poorly maintained power
tools.
● Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
jam and are easier to control.
● Use the power tool, accessories and bits etc., in
accordance with these instructions, taking into account
the actual working conditions and the work that is to be
done. It can be dangerous to use power tools for
purposes other than those for which they are intended to
be used.
● Keep handles and grips clean, dry and free from oil and
grease. Greasy handles and grips make it difficult to hold
and control the tool in unexpected situations.
2.2.5 Servicing
● Power tools must only be serviced by qualified personnel
using identical spare parts. This will ensure that the
power tool remains safe to use.
2.2.6 Safety instructions for mixers
● Hold the tool with both hands at the intended handles.
Loss of control can cause personal injury.
● Ensure sufficient ventilation when mixing flammable
materials to avoid a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by the sparks the
power tool produces.
● Do not mix food. Power tools and their accessories are
not designed for processing food.
● Keep the cord away from the working area. The cord may
be entangled by the mixer basket.
● Ensure that the mixing container is placed in a firm and
secure position. A container that is not properly secured
may move unexpectedly.
● Ensure that no liquid splashes against the housing of the
power tool. Liquid that has penetrated the power tool can
cause damage and lead to electric shock.
● Follow the instructions and warnings for the material to
be mixed. Material to be mixed may be harmful.
● If the power tool falls into the material to be mixed,
unplug the tool immediately and have the power tool
checked by a qualified repair person. Reaching into the
bucket with the tool still plugged in can lead to electric
shock.
● Do not reach into the mixing container with your hands
or insert any other objects into it while mixing. Contact
with the mixer basket may lead to serious personal injury.
● Start up and run down the tool in the mixing container
only. The mixer basket may bend or spin in an
uncontrolled manner.
2.2.7 Reduction of noise and vibrations
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the time
the tool is in use,
and use low-power/vibration mode
and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
● Only use the tool in accordance with these instructions.
● Check that the tool is in good condition.
● Use accessories in good condition, and which are
suitable for the purpose.
● Keep a firm grip on the handles/grips.
● Maintain and lubricate the tool in accordance with these
instructions.
3 Assembly
3.1 To assemble the product
Warning! If you do not obey these instructions, there
is a risk of death or injury.
1
Push down the chuck by hand and hold in this
position. (Figure 2)
21