Storage And Care - Florabest Toz96711 Montage-Und Sicherheitshinweise

Assembly / Storage and Care / Service / Disposal
Insert the screw with spring ring, washer and
rubber washer into the base from below.
1
Use the centre hole. Please note the position
of the washers (see Fig. A)!
Place the large rubber washer
screw protruding at the top (see Fig. B).
Secure the screw from below using a socket
1
key and place the stand tube
screw from the top, and slightly screw in.
1
Align the rubber washer
tube . Tighten the stand tube
3
socket key (see Fig. C).
Note: The clamping plate
to protect the umbrella pole (see Fig. D).
Please do not remove.
Using inserts
Use the inserts to match the size of your
5
umbrella pole.
Insert the necessary inserts
tube . The groove of the respective insert is
3
intended to leave room for the clamping plate
(see Fig. E).
Insert the patio umbrella. Firmly secure the
wing bolts (see Fig. F).
6

Storage and Care

The granite stand is maintenance-free.
If necessary, remove any dirt with warm soapy
water.
Retighten screws as necessary.
Store granite stand in a dry location during
periods of non-use, e.g. over winter.
Stainless steel parts:
Please treat the stainless steel tube with an
automotive chrome care product or stainless
steel care lotion as necessary.
6 GB
SunRain Handels GmbH
Bahnhofstrasse 63
over the A-4910 Ried-Austria
2
gardenservice@gmx.at
onto the
3
below the stand
2
with the
3
is premounted
4
For all inquiries about your product, please have
your receipt and the article number (e.g. IAN
12345) ready as your proof of purchase.
in the stand The packaging is made of environmentally friendly
5
materials, which may be disposed of through your
local recycling facilities. Please dispose of this
4
product at the end of it's useful life.
Service
Granite Parasol Stand
IAN 96711
square
Granite Parasol Stand
IAN 96713
round
Disposal