RIKA Interno Montageanleitung Seite 15

Open the decorative door.
Remove the cover behind the key holder and disconnect the power plug of the
stove.
Close the decorative door again.
Open the retaining screws on the bottom of the panel.
Now you can slide the stove to the front.
Depending on the desired connection replace a cover plate and the connection
against each other.
Screw the air intake adapter firmly to the bottom plate.
Pull out the flexible pipe carefully as far as necessary.
#2
Connect the flex hose to the air intake pipe.
#5
Tighten the hose clamp.
Slide back the flexible pipe to a suitable length and hang in the air intake pipe
to fix it.
#8
Connect your air supply to the air intake adapter.
Push back the stove into the wall. As a result, the air intake pipe is pushed into
the air intake adapter.
Secure the stove from the bottom to prevent accidental sliding out.
Open the decorative door and connect the stove with the power plug.
Mount the parts in reverse order.
Your stove is ready for use again.
#8
# 7
#5
|15
14