VEVOR VBPYCA-210 Installations- Und Bedienungsanleitung Seite 42

Step 4:
After selecting "Smart Heat Pump", enter the interface of "Add Equipment", and confirm that the
wire controller has selected the "Blink Quickly". After the indicator light under "
quickly, follow the steps below:
Enter the Wi-Fi connection interface, enter the Wi-Fi password of the mobile phone (it
1
must be the same as the Wi-Fi of the mobile phone connection), click "Next".
Then click "Confirm the indicator is blinking" .
2
Click "Blink Quickly" to enter the connected status of the device.
3
41
" flashes