VEVOR VBPYCA-210 Installations- Und Bedienungsanleitung Seite 27

No. Items
7 Timer Setting
8 Cancel Timer Setting
9 Forced Defrosting
Frequency Mode
10
Switch
Celsius/Fahrenheit
11
Switch
Restore Factory
12
Setting
Press and hold the "
Enter timer selection, the hour of "timer on 1" will flash, collect "
" " keys can set hour; press "
"timer on 1" , press "
Press " " key again to set "timer off 1" in the same way.
Other time period setting in turn and so on;
A total of 3 timers can be set.
Press " " key can save and exit;
Back to main interface, it will show the number of scheduled time periods;
If the "Timer On" and "Timer Off" are the same, the timer setting of the
current time period is canceled.
Press and hold the "
forced defrosting mode.
When entering the defrosting, showing flashes "
This function is only used in special circumstances, such as after-sales
maintenance.
Press and hold the "
switch between "
When device is off, press "
interface to switch Celsius/Fahrenheit.
In the shutdown state, hold down the "
keys for 3 seconds to restore factory setting. In this case, the buzzer will
ring twice, and all parameter values will change to default values.
26
Operation Ways
" key for 3 seconds to enter the timer setting:
" key again to switch to the minute of
" and " " keys can set minute;
"and " " keys for 3 seconds to enter the
" key for 3 seconds while the device is on to
", " ", and " " modes.
"and" " keys for 3 seconds in main
".
" + " " + " " +"
" and
"