VEVOR VBPYCA-210 Installations- Und Bedienungsanleitung Seite 40

3. Wi-Fi Module Configuration Steps:
Method 1
This method is recommended if the device is within the Wi-Fi range.
Step 1:
Blink Quickly Mode: When power is on, press and hold the " " and " " keys at the same
time for 3 seconds to enter the distribution network. The " " icon will flash quickly.
Tips: First let the wire controller enter the network configuration state, and then enter the
APP. There is a quick way to add it.
Note:
Click the device to check the status, and you can set the operating mode, ON/OFF, timer.
Click "＋" to add devices.
Step 2:
Turn on the phone's Wi-Fi function and connect to the Wi-Fi hot-spot. The Wi-Fi hot-spot must
be able to connect to the Internet normally;
39