Installation Layout - Vevor Vbpyca-210 Installations- Und Bedienungsanleitung

3.3.2. Installation Layout

Notice: The filter must be cleaned regularly to ensure that water in the system is clean and avoid
blocking the filter. It is necessary that the drainage valve is fixed on the lower water pipe. If the
device is not running during winter, please disconnect the power supply and drain water. If the
ambient temperature around the device is below 32°F, and you need to use the device, please
keep the device powered on.
The installation diagram is shown in the following figure:
No.
Swimming Pool Heat Pump
①
Y-Type Filter
②
Check Valve
③
Circulating Water Pump
④
Hair Collector
⑤
Stop Valve
⑥
The frame must be fixed by expansion bolts (M10) to a concrete foundation or brackets.
1
The concrete foundation must be solid; the bracket must be strong enough and anti-rust treated.
Figure 3.3-1 Installation Diagram
Table 3.3-1 Installation
Item
Device Installation
No.
PH Regulator
⑦
Sand Tank Filter
⑧
Flocculator
⑨
Disinfector
⑩
Metering Pump
⑪
Condensate Water Pipe
⑫
19
Item