Key Operating Instruction - Vevor Vbpyca-210 Installations- Und Bedienungsanleitung

4.2. Key Operating Instruction

No. Items
1 Unlock/Lock
2 ON/OFF
Check System
3
Parameters
Heating/Cooling/Auto
4
Mode Switch
Target Temperature
5
Setting
6 Time Setting
Table 4.2-1 Operation Guide
Press and hold the "
unlock/lock the keys, and it will automatically lock the keys if there is no
operation within 60 seconds (the screen will not turn off).
In the main interface, after unlock, press the "
power status.
n the main interface, press and hold the "
I
the device status parameter query, cooperate with the "
keys for parameter browsing, and press the "
parameter query. If no operation is performed within 60 seconds, it will
automatically return to the main interface.
With the power on, press the "
and " " modes.
In the power on interface, press "
mode setting temperature, and if no operation is performed within 60
seconds, it will automatically return to the main interface.
Press the " " key to enter the clock setting state. First, the hour
flashes, indicating that the hour value of the current time can be adjusted
through " " and "
plus one hour, every time you press the "
you hold down the "
or decremented automatically. After setting the hour value, press "
key again; At this time, the minute flashes, indicating that the minute value
of the current time can be adjusted through the "
setting the minute value, press "
25
Operation Ways
" key for 3 seconds on the main interface to
" key to switch between "
" or "
" keys. Every time you press the "
" key or " " key, the hours will be incremented
" key again to finish.
" key to switch the
" key for 3 seconds to enter
" and "
" key to exit the
", "
" key to adjust the current
" key for
" key for minus one hour. If
" and " "key. After
"
",
"