General; Electrical Components; Compatible Products; Component Positions - Nibe Rmu S40 Installateurhandbuch

General

RMU S40 is a room unit with built-in temperature and humid-
ity sensors.
RMU S40 can be used for:
• to control and monitor NIBE, the heat pump/indoor mod-
ule/control module (the main product), from the room in
the house where RMU S40 is located
• to present the current room temperature in the main
product's display
• to change the room temperature
• to limit relative humidity (RH) levels in heating or cooling
operation
• to limit cooling supply to prevent condensation on pipes
and components in the cooling system
• demand-controlled ventilation

COMPATIBLE PRODUCTS

Main products in NIBE S-series.
CONTENTS
1 x RMU S40 with rear panel

COMPONENT POSITIONS

AA4
AA4-X1
18
AA32
SF1
AA4-X5

ELECTRICAL COMPONENTS

AA4 Display unit
AA4-X1 Terminal block, communication and voltage
AA4-X5 Power supply, Micro-USB
AA32 Space for memory card (Micro-SD)
SF1 On/Off button (switch)
Designations according to standard EN 81346-2.
RMU S40 | EN