General; Concise Product Description; Setting Table - Nibe F1330 Montage- Und Bedienungsanleitung

12 12
In order to get the ultimate benefit from your climate system HPAC you should read through this
Installation and Maintenance Instruction.
HPAC is a climate system for heating and cooling large houses and apartment buildings as well as
industrial properties. Ground, rock or lakes can be used as the heat exchange source.
HPAC is a Swedish made quality product offering a long life span and safe operation.
Completedby the installation engineer when the HPAC module is installed
Installation date
Type designation / serial number
HPAC 42
Installation engineers
The type of heat transfer fluid Mixing proportion/freezing point
Settings
FIGHTER 1330
Menu
9.1.10 Cooling
2.3 Min. flow temp.
6.4.1 Cooling
6.4.2 Cooling curve
6.4.3 Offset cold curve
6.4.4 Starttemp. heating
6.4.5 Starttemp. cooling
6.4.6 Start active cooling
6.4.7 GM for compr.-step
6.4.8 Diff Passive/Active
____________
Date

General

_ _ _ _ _ _ _ _ _ _ _ _ _ _
Factory
setting
.................. Off
.................. 15
.................. Off
.................. 2
.................. 0
.................. 20
.................. 25
.................. 30
.................. 30
.................. 4
______________________
Signature
HPAC 42 HPAC 42