PCE Instruments PCE-MSM 4 Bedienungsanleitung Seite 29

Establish connection to the device
To let the software establish the connection automatically, follow these steps:
1. Make sure, that the device is connected to the PC.
Click on "COM Port(C)" in the menu bar and select "Auto(A)" the software now tries to
2.
establish the connection automatically.
Press the "REC" button on the device to enable data transmission. The real-time
3.
display becomes active.
You can also select the COM port manually:
1. Make sure, that the device is connected to the PC.
Open the Windows device manager and click on "Connections (COM & LPT)" to look
2.
for the proper COM port.
Click on "COM Port(C)" in the menu bar and select "Manual(M)". Now you can type in
3.
the COM port number.
Press the "REC" button on the device to enable data transmission. The real-time
4.
display becomes active.
© PCE Instruments
26