Before You Start - Elinchrom ELC 1000 Pro HD Gebrauchsanleitung

BEFORE YOU START!

BASIC FEATURES
• Robust fire retardant body shell
• Improved rubberised handle
• Precise control knob
• Smart OLED display
• 3.5mm synchronisation socket
• Integrated EL-Skyport receiver
• 300 W Halogen modelling lamp
• Efficient low noise fan cooling
ADVANCED PROGRAMMABLE FEATURES
• Photocell on/off
• Pre-flash option for perfect synchronization with speedlites
• EL-Skyport wireless triggering & remote control
• Optimised recycle time
• Energy saving options
• Sequence mode
• Delayed mode
• Strobo mode up to 20 flashes per second
• Customisation of the charge ready beep status
• Unit statistics
• Visual Flash Control (VFC)
• User Presets
MAINS SUPPLY
Use only Elinchrom mains cord.
MAINS FUSE
Standard type 5x20mm, use only fast acting F10AH
(code 19038) for ELC.
Note: Remove the mains cable before exchanging a
blown fuse. Open the little drawer in the mains plug with
a screwdriver and replace the fuse with the spare fuse,
which is placed in its support in this drawer. (N.B. Please
don't forget to check the correct rating of the fuse!).
User Manual
EN
7