Switching On/Off; Transport - Parkside Performance Pphsa 40-Li C3 Montage-, Bedienungs- Und Sicherheitshinweise

˜ Switching on/off
(Fig . B)
NOTE
You can only operate the product with
u
2 battery packs
[ 9 ]
Before switching on the product: Remove
u
the blade encasing
cutter bar .
[ 2 ]
Do not lock the on/off switch
u
safety switch . The motor must switch
[ 21 ]
off when you release the switches .
Switching on
m CAUTION! Risk of personal injury
and damage to the product!
Ensure your stance is stable and hold the
u
product tightly with both hands and away
from your body .
m NOTICE! Risk of property
damage and damage to the
product!
Before switching on the product: Make
u
sure that the product is not touching any
objects .
1 . Insert the battery packs
2 . Remove the blade encasing
3 . Always hold the product with both hands:
One hand on the handle
hand on the front handle
4 . Press and hold the safety switch
front handle while pressing the on/off
[ 4 ]
switch on the handle
7 ] [
5 . The product runs at the lowest speed
(Setting the speed: see "Setting the stroke
rate") .
Switching off
1 . Release either the safety switch
on/off switch .
7 ] [
18 GB
.
from the safety
[ 13 ]
and the
[ 7 ]
.
9 ] [
.
[ 13 ]
and the other
[ 8 ]
.
[ 4 ]
on the
21 ] [
.
[ 8 ]
or the
21 ] [
2 . Wait until the product has stopped before
placing it down .
3 . Remove the battery packs
product if you are leaving the product
unattended or if you have finished working .
˜ Checking the charging level
of the battery packs on the
product
Press the button
o
panel .
5 ] [
The charging level of the battery packs
o
is indicated by illumination of the
corresponding LEDs on the charging level
indicator .
17 ] [
During operation, the charging level of the
o
battery packs
9 ] [
on the charging level indicator
Colour
Red, orange, green
Red, orange
Red
Charge the battery packs
o
red LED on the charging level indicator
is illuminated .
˜ Transport
Switch off the product and remove the
o
battery packs . Let all moving parts come
[ 9 ]
to a complete stop .
Always transport the product with the blade
o
encasing .
13 ] [
Always carry the product by the handle
o
˜ Cleaning, care and storage
m WARNING! Risk of injury due to
unintentional start-up!
Protect yourself when performing
u
maintenance or cleaning work .
Switch off the product and remove the
u
battery packs
9 ] [
from the
9 ] [
on the control
18 ] [
9 ] [
is permanently displayed
.
17 ] [
Meaning
Fully charged
Half charged
Needs to be charged
when only the
9 ] [
17 ] [
.
.
8 ] [