VEVOR BT-RTR08-LCD Bedienungsanleitung Seite 14

AUTO LOW TEMP
• While in HIGH TEMP mode, press MODE Button again to enter LOW
TEMP.
• Use UP / DOWN Buttons(▲▼) to set the LOW TEMP trigger.
• The fan will activate when the room temperature falls below the set value
and gradually increase to the speed set in ON mode.
• To disable, press and hold UP / DOWN Buttons(▲▼) simultaneously for
3 seconds.
Auto Range Setting
• To operate the fan within a specific temperature range, set the HIGH
TEMP trigger lower than the LOW TEMP trigger. The fan will only work if
the sensor temperature stays within this range.
TIMER Mode
• Press MODE Button ( to enter TIMER mode.
• This is a standalone mode used to set fan turn-on or turn-off timers. It
cannot
• be used together with other modes.
TIMER TO ON
Use UP / DOWN Buttons(▲▼)to set a startup countdown (max:
19h59min).
- 13 -