VEVOR BT-RTR08-LCD Bedienungsanleitung Seite 12

Countdown
Shows remaining time in TIMER mode (TIMER TO
ON / OFF) or
remaining cycles in CYCLE TIMES mode
User Settings
Displays the current value for the selected mode.
Mode Programming
NOTE:Each mode functions independently. Only one mode can be active
at a time. Mode settings are automatically saved, so there is no need to
reconfigure after restarting the device.
ON Mode
• Press MODE Button to select ON mode.
• Use UP / DOWN Buttons(▲▼) ( to adjust the fan speed level (0-10).
• The speed set in this mode also applies to other modes.
- 11 -