Zumtobel capix Montageanleitung Seite 6

Fixing options
The two versions of mounting brackets have been developed for standardized support structures. There are
two heights of brackets: 10 and 15mm. The brackets which were chosen for the project are delivered with the
pixel strings.
Fixing by means of a screw (11), the head of which must be 4.0-5.0mm high and the nominal diameter of which must not
exceed 4.0mm: 10mm bracket
Fixing by means of two screws (as above on a Jakob Greenguide Cross Clamp 90° (M4): 10mm bracket:
Fixing on cross rods welded together:
Fixing on a wire rope intersection with 2x3mm ropes: 10mm bracket
6/14
Technical data was correct at time of going to press. We reserve the right to make technical changes without notice.
Die technischen Inhalte entsprechen dem Stand bei Drucklegung. Änderungen bleiben vorbehalten.
©
Copyright Zumtobel Group 2009
With 2x 3mm rods
--> 10 mm bracket
With 2x5mm or
1x3mm + 1x5mm rods
--> 15 mm bracket
Art.Nr.: 00103786/4/P-12.09