Zumtobel capix Montageanleitung Seite 4

CAPIX in detail
Mounting bracket 10mm
CAPIX string (top view)
with pixel (1), end of string (2), cable gland (3), string (cable) (4), SCU connector (5),
direction marker (6)
CAPIX string (side view)
Replacement pixel
Leave the pixel in the ESD packaging until it is needed.
Otherwise the pixel may be damaged by electrostatic
discharges.
4/14
Technical data was correct at time of going to press. We reserve the right to make technical changes without notice.
Die technischen Inhalte entsprechen dem Stand bei Drucklegung. Änderungen bleiben vorbehalten.
Mounting bracket 15mm
Cable gland
with gland socket (8), seal element (9) and gland
nut (10)
©
Copyright Zumtobel Group 2009 Art.Nr.: 00103786/4/P-12.09