17.7. Setup wizard
Starts the Setup wizard, as described in the 'Initial start-up' section.
17.8. Info
The software version and the device's radio identification number are displayed
here.
17.9. Backlight
You can use this function to set the display backlight:
− Dim the display in standby mode or operating mode after a set time
− Brightness of the display
Set timeout
Select Timeout: and select On, 10, 20,30, 45,60, 90, 120 or 180 seconds by
turning the OK rotary dial.
Display Power-on Level
Select Power-on Level by rotating and then pressing the OK rotary dial, and set
the desired brightness level to High, Medium or Low.
Display Standby Timeout
Select Standby Timeout: and select ON, 10, 20,30, 45,60, 90, 120 or 180
seconds by turning the OK rotary dial.
Display Standby Level
Select Standby Level by rotating and then pressing the OK rotary dial, and set
the desired brightness level to Medium or Low.
18. Settings in the 'Main menu'
You can use the Main menu to call up the operating modes (just as you can with the
MODE button):
Internet radio
Music player
DAB
FM
Auxiliary Input
In addition, you can set the sleep function and the alarm function here.
18.1. Sleep
Select this entry and select the desired setting for automatic switch-off using the
OK rotary dial:
Sleep OFF – 15 minutes – 30 minutes – 45 minutes – 60 minutes
With the Sleep off setting, no switch-off time is set.
You can also set the switch-off time through repeated pressing of the SLEEP button.
88