Safety.precautions; Symbols On The Implement; Symbols Used In The Manual - FLORABEST IAN 79060 Originalbetriebsanleitung

GB
Acoustic pressure level (LpA)
......................... 87 dB(A); KpA= 2 dB(A)
Measured sound power level (LwA)
....................... 103 dB(A); KwA= 2 dB(A)
Guaranteed sound power level
............................................. 105 dB(A)
Vibration (an) ........9,4 m/s
The noise and vibration values were estab-
lished by the standards and stipulations
listed in the Conformity Declaration.
Technical and visual changes can be com-
pleted in the course of further development
without notification. Consequently, all
dimensions, references and details in these
Operating Instructions are without guar-
antee. Consequently legal claims based
on these Operating Instructions cannot be
asserted.
Safety precautions
This section covers the basic safety instruc-
tions when working with this implement.

Symbols on the implement

WARNING!
These Instructions must be read!
Danger of injury due to flung-out
material! Keep bystanders well
away from the implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools!
Wear eye and ear protection.
6
; K= 1,5 m/s
2 2
105
Remove any soil residue from the springs
of the impact protection cover and/or the
housing to ensure that the cover closes
correctly. When operating without the coll-
ection basket, the impact protection cover
must be completely closed.

Symbols used in the manual

CAUTION – Sharp tools: Ensure
that the hands and feet are kept
well away from the cutting tools.
The cutting cylinder continues to
rotate briefly after the motor has
been switched off!
Always disconnect the plug from
the mains prior to maintenance
work or if the power cable is
damaged!
. Caution with steps! Turn off
the power when the implement
is to be carried across steps!
Noise level ratings L
Protection Class II
Electrically powered implements
must not be disposed of with the
domestic waste
Warning symbols with in�
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
in dB(A).
WA