Operation; Cleaning - Westfalia 86 62 77 Bedienungsanleitung

Operation

Press and hold the ON/OFF switch (1) in order to activate the grinding unit
and to switch on the built-in LED (6).
You can set the required grinding size by turning the screw (7):
clockwise
counter clockwise
If the grinding unit does not turn when set to a very fine setting, you will have
to select a coarser setting. If the grinding unit still does not turn, it may be
blocked. Select the coarsest setting and shake the pepper mill back and forth
until the grinding unit operates again.
If the grinding unit fails to turn frequently even at coarse setting or if it only
turns very slowly, the batteries are flat. In this case, replace the 4 batteries
with a complete new set. Do not mix rechargeable batteries with ordinary
batteries or new ones with flat batteries.

Cleaning

Preferably, clean the container immediately before you intend to fill it with new
pepper or salt. Shake the container empty first and remove any residue with a
small, non-food contaminating brush. Do not wash the container with water or
any other liquid.
Only use a lightly moistened cloth to clean the outside housing.
Do not immerse the pepper mill in water or any other fluids.
Do not use any aggressive detergents or similar for cleaning.
Do not use any metallic or sharp tools as this could damage the surface of the
unit.
Operation
= finer;
= coarser.
7