Before Using For The First Time; Inserting Batteries And Filling - Westfalia 86 62 77 Bedienungsanleitung

Before using for the first time

Familiarize yourself with the unit before using for the first time. Observe the
safety instructions and only use the unit in compliance with these operating
instructions.
Remove all packaging components from the unit.
Clean the unit, as described in chapter „Cleaning" on page 7.

Inserting batteries and filling

1. Hold the container (5) with one hand and turn the housing
cover (8) counter clockwise with the other hand. Pull the
cover upright to remove it from the container.
2. Pull the drive unit (3) and the transparent battery cover
upright.
3. Insert 4 fresh batteries of the type LR6 (AA) into the battery
compartment (2). Observe the right polarity. The battery
polarity symbols are shown in the battery compartment.
4. Fill the container up to approx. 80 % with pepper or salt
through the filling hole (4).
5. First, place the transparent battery
cover on the drive unit and then place
the drive unit with the included batter-
ies in the container. Make sure the
connecting wires are directed above
the screws on the container. Press the
drive unit firmly on the container.
6. Put the housing cover over the drive unit. Turn the housing cover clockwise
and tighten the container.
Operation
6