Busch+Müller Core Highbeam Montage- Und Bedienungsanleitung Seite 23

Assignment of bluetooth button Blucon:
Apart from the pre-installed settings, the bluetooth button
required.
To this intent, start the app and connect it to the headlight. Click on "Button configuration" . The button
now appearing can be used to assign a function to each button. According to German StVZO, however,
briefly pressing the high beam button is reserved for switching the high-beam function on or off.
8. Further information
Cleaning: Protect your headlight against exposure to water under high pressure.
For example, never point a water hose or high-pressure cleaner directly at the headlight.
Transport: If you transport your bike on your car in the rain, cover the headlight, with a plastic bag, for
example, to prevent moisture penetration.
Radio speedometers: The electronics of radio speedometers and LED headlights may interfere with
each other. Interference can be reduced by maximising the distance between the LED headlight and
the radio speedometer and minimising the distance between the transmitter and receiver of the radio
speedometer.
Disposal: Electronic components must not be handled as household waste but are to be disposed of as
hazardous waste.
Repairs: In case of defects, please contact your specialist bicycle dealer or our service department at
service@bumm.de oder +49 2354 915-7111.
44
, if available, can be customized as
5.2
9. Liability
We do not assume liability for any and all damage caused by improper use (e.g. dropping
the headlight, inadequate safety of assembly and its consequences, immersion in water or other
liquids etc.). The guarantee is rendered invalid if the headlight
Have fun with your new headlight and enjoy safe cycling!
For spare parts please visit our spare part shop at www.bumm-shop.de
Technical modifications reserved.
Busch & Müller KG • 58540 Meinerzhagen, Germany • Tel. +49 2354 915-7111 • service@bumm.de •
www.bumm.de
1 is opened."
45