Busch+Müller Core Highbeam Montage- Und Bedienungsanleitung Seite 15

4. Legal regulations
Before you operate your vehicle in public traffic, you are obliged to ensure that your vehicle complies
with national and local laws and regulations, and you, as a traffic participant must abide by the traffic
regulations that apply. These can be found in the Highway Code or national equivalent, and depending
on the country, also at other sources.
In Germany, the prescribed mounting height for headlights
consult your national Road Traffic Regulations or contact a local bicycle specialist retailer. Always make
sure the headlight is mounted and aligned in a way to ensure that oncoming traffic is not blinded.
!
Make sure the headlight is not covered under any circumstances. Also, take care that the headlight
has been mounted and aligned as prescribed.
5. Technical specification
Headlight dimensions: Height: 44 mm | Length: 117 mm | Width: 37 mm |
Weight: 120 g | Brightness: 70/35/15 lux |High beam 100 lux
Replaceable lithium battery, 3,000 mAh, quick-charging function via USB-C, power bank function with
1,500 mAh. Bluetooth button Blucon with CR 2032 battery.
28
is between 40 and 120 cm. For details,
1
6. Assembly
6.1. General assembly instructions
!
Make sure the headlight is not covered under any circumstances. Also, take care that the
headlight has been correctly mounted and aligned as prescribed.
WARNING To avoid falls, accidents and severe injuries, always use the enclosed handlebar
bracket assembly . If unsuitable or improperly positioned brackets are used, the headlight may
2
loosen and change position, slide down and, in the worst case, get caught in the wheel spokes.
NOTICE Never mount brackets on conical components!
Make sure to tighten all screws just sufficiently to ensure the headlight
ently. This is particularly important when travelling on uneven terrain.
1 cannot move inadvert-
29