Conventional carbon and active carbon filters cannot be cleaned. The capacity of
these filters is limited. You can use such filters for about 3-6 months. Replace a
depleted filter. You can get further information on filter packaging.
Do not touch the illuminant with your hands. The sweat on your fingers will reduce the
operating time of your new illuminant. Use a thin cloth or a thin glove.
1. Disconnect the appliance from the energy supply.
2. The Illuminant should have cooled down before you remove it.
3. Remove the old illuminant.
4. Replace it with a new one of the same kind and power.
The illuminants as well as the grease filters do not carry a
The power cord must be replaced by a qualified and authorized
Carbon filter
Changing the illuminant - Halogen
Attention!
guarantee.
Replacing of the power cord
DANGER!
professional only.
75