Display Settings - Kenwood kdc-x7100dab Bedienungsanleitung

AUDIO SETTINGS
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you
want to adjust:
When 2-way crossover is selected:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER
– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is
selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 20)
When 3-way crossover is selected:
TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER
– You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 21)
• [REAR-SP LOCATION] of [CAR SETTINGS] is selectable only if:
– 2-way crossover is selected. ( 5)
– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 20)
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
22
ENGLISH
If you specify the distance from the center of the currently
set listening position to every speaker, the delay time will be
automatically computed and set.
1 Determine the center of the currently set listening position
as the reference point.
2 Measure the distances from the reference point to the
speakers.
3 Calculate the differences between the distance of the
furthest speaker (rear speaker) and other speakers.
4 Set the [DISTANCE] calculated in step
speakers.
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening
position

DISPLAY SETTINGS

Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [DIMMER TIME], it will be canceled once you
press and hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 23), then press
the knob.
3
Repeat step
or follow the instructions stated on the selected item.
4
Press and hold
To return to the previous setting item, press
3
for individual
2
until the desired item is selected/activated
to exit.
.