Digital Radio - Kenwood kdc-x7100dab Bedienungsanleitung

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UPDATE xxxx/ YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
F/W UPDATE xxxxx/ For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
F/W UPDATE Vxxx
FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;
OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music information if
РУССКИЙ applicable.
By default, [ENGLISH] is selected.
ESPANOL
Change the crossover type
1
Press repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 20, 21).
Caution
Select a crossover type according to how the speakers are connected. ( 31)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.

DIGITAL RADIO

About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available
today. It can deliver digital quality sound without any
annoying interference or signal distortion. Furthermore, it
can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called "services") to form one "ensemble."
The "primary component" (main radio station) is sometimes
accompanied by a "secondary component" which can
contain extra programs or other information.
Preparation:
1
Connect the supplied DAB antenna to the DAB antenna
jack. ( 31)
2 Press repeatedly to select DIGITAL AUDIO.
3 Press and hold (LIST UPDATE) to start the
Service List update.
"LIST UPDATE" appears and update starts. "UPDATED"
appears when update completes.
Updates take up to 3 minutes. No interruption (such as
traffic information) is possible during updates.
• To cancel the Service List update:
Press and hold (LIST UPDATE) again.
5
ENGLISH