Kenwood kdc-x7100dab Bedienungsanleitung Seite 18

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a
selected time. ( 15)
During a call:
• ZONE 1 illuminates according to the settings made for [DISPLAY] ( 23)
and ZONE 2 illuminates in green color.
• If you turn off the unit or detach the faceplate, the Bluetooth
connection is disconnected.
The following operations may differ or not available depending on the
connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
14
ENGLISH
On the faceplate
Press or the volume knob or one of
the number buttons (1 to 6).
Press .
Press .
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 15), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
On the faceplate
Press .
Press .
Press .
Press .
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press during a call.
• Operations may vary according to the
connected Bluetooth device.
.