Eurochron EFWS-Color Bedienungsanleitung Seite 40

Button
CHANNEL/+
MEM/-
INDEX
HISTORY
SENSOR
BARO
RESET
°C/°F
40
Function
In normal display mode, press to toggle between the outdoor sensors.
In normal display mode, press and hold for 2 seconds to display the
measuring values of all outdoor sensors consecutively.
During consecutive display, press to return to the normal display
mode.
In the setting modes, press to increase the value.
In normal display mode, press to display the minimum/maximum
measured values.
While the minimum/maximum measured values are displayed, press
and hold for 2 seconds to reset the values.
In the setting modes, press to reduce the value.
In normal display mode, press to switch between the display of the
dew point and heat index.
In normal display mode, press to display the log of the past 24 hours.
Press once to start the search for the outdoor sensor signal.
In normal display mode, press to change the air pressure unit.
In normal display mode, press and hold for 2 seconds to enter the
barometer setting mode (relative/absolute).
Press once to delete all the settings and to reset the weather station
to the factory settings.
In normal display mode, press to change the temperature unit.